• pro audio Line Array System
  • pro audio pro speaker
  •  Professional Active Speaker
  • pro audio pa speaker
  • pro audio Amplifier
  • Guitar Amplifier
  • pro audio Loudspeaker
  • pro Peripheral Equipment
  • pro audio accessories

HomePage >Paaudio Products

Power Amplifier(P Series)

Information:

    Power Amplifier, P Series Power amplifier provide extensive protection features such as Overheat short currents, DC protection, zero current, clip limiter, soft start

Description:

    
SPECIFICATIONS
P1200
P2000
P3000
P3500
P4000
P6000
 
STEREO   MODE   (Both   Channels   Driven)
8   ohms
 
 
 
 
 
 
Stereo Power
300   W
400   W
500   W
600   W
700   W
1300   W
4   ohms
 
 
 
 
 
 
Stereo Power
450   W
620   W
750   W
1050   W
1300   W
2500   W
2   ohms
 
 
 
 
 
 
 EIA   1kHz,   1% THD
720W
950   W
1200   W
1650   W
2000   W
3900W
 
BRIDGE   MONO   MODE
8   ohms
 
 
 
 
 
 
FTC 20Hz - 20kHz,   0.1% THD
870W
1150   W
1450   W
2050   W
2450   W
4500W
4   ohms
 
 
 
 
 
 
   EIA 1kHz,   1%THD
1450   W
1850   W
2400   W
3300   W
4000   W
4800W
Signal   to   Noise,   20Hz-20kHz
98   dB
100   dB
101   dB
102   dB
104   dB
106   dB
 
ALL   MODELS
Distortion (Typical)
 
 20Hz-20kHz:10dB   below rated   power
Less   than   0.03%   THD,   4   and   8   ohms
1.0kHz and below: full   rated   power
Less   than   0.03%   THD,   4   and   8   ohms
Frequency   Response
20   Hz-20   kHz,   \1   dB
-3   dB   points:   5   Hz   -   50   kHz
Damping Factor, 1kHz and below
Greater   than   300   at   8   ohms
Input   Impedance
10k   ohms   unbalanced,   20k   ohms   balanced
Input   Clipping
10   Vrms   (+22   dB)
Cooling
Continuously   variable-speed   fan,   rear-to-front   air   flow
Connectors,   each   channel
Input:   Active   balanced;   barrier   strip,   XLR   and   1/4"   (6.3mm)
TRS   tip   and   XLR   (pin   2   positive)
Output:   touch-proof   binding   posts   and   Neutrik®   Speakon®
Controls
Front:   AC   switch,   Ch.   1   and   Ch.   2   gain   knobs
Rear:   10-position   DIP   switch
Indicators
Power-On:   Green   LED
Signal:   Yellow   LED   (1   per   channel)
Clip:   Red   LED   (1   per   channel)
Amplifier   Protection
Stable   into   reactive   or   mismatched   loads
Load   Protection
On/off   muting,   AC   coupling   ,   triac   crowbar   ,   on   each   channel)
Power   Requirements
100,   120,   230   VAC,   50-60   Hz
Dimensions
483*480*143(mm)

Paroyal Audio Company ,Professional audio system, P1200 Power Amplifier,P2000 Power Amplifier ,P3000 Power Amplifier,P3500 Power Amplifier,P6000 Power Amplifier,pro audio system,pro speaker system

[Click to back]