Power Amplifier (PS Series)

Information:

    PS Pro Amplifier

Description:

    

SPECIFICATIONS	PS300	PS400	PS500	PS600	PS700	PS800	PS1300
	STEREO   MODE   (Both   Channels   Driven)
8   ohms
Stereo Power	300   W	400   W	500   W	600   W	700   W	800   W	1300   W
4   ohms
Stereo Power	450   W	620   W	750   W	1050   W	1300   W	1500   W	2500   W
2   ohms
EIA   1kHz,   1% THD	720W	950   W	1200   W	1650   W	2000   W	3000   W	3900W
	BRIDGE   MONO   MODE
8   ohms
FTC 20Hz - 20kHz,   0.1% THD	870W	1150   W	1450   W	2050   W	2450   W	3550   W	4500W
4   ohms
EIA 1kHz,   1%THD	1450   W	1850   W	2400   W	3300   W	4000   W	4500   W	4800W
Signal   to   Noise,   20Hz-20kHz	98   dB	100   dB	101   dB	102   dB	104   dB	104   dB	106   dB
	ALL   MODELS
Distortion (Typical)
20Hz-20kHz:10dB   below rated   power	Less   than   0.03%   THD,   4   and   8   ohms
1.0kHz and below: full   rated   power	Less   than   0.03%   THD,   4   and   8   ohms
Frequency   Response	20   Hz-20   kHz,   ±1   dB
	-3   dB   points:   5   Hz   -   50   kHz
Damping Factor, 1kHz and below	Greater   than   300   at   8   ohms
Input   Impedance	10k   ohms   unbalanced,   20k   ohms   balanced
Input   Clipping	10   Vrms   (+22   dB)
Cooling	Continuously   variable-speed   fan,   rear-to-front   air   flow
Connectors,   each   channel	Input:   Active   balanced;   barrier   strip,   XLR   and   1/4"   (6.3mm)
	TRS   tip   and   XLR   (pin   2   positive)
	Output:   touch-proof   binding   posts   and   Neutrik®   Speakon®
Controls	Front:   AC   switch,   Ch.   1   and   Ch.   2   gain   knobs
	Rear:   10-position   DIP   switch
Indicators	Power-On:   Green   LED
	Signal:   Yellow   LED   (1   per   channel)
	Clip:   Red   LED   (1   per   channel)
Amplifier   Protection	Stable   into   reactive   or   mismatched   loads
Load   Protection	On/off   muting,   AC   coupling   ,   triac   crowbar   ,   on   each   channel)
Power   Requirements	100,   120,   230   VAC,   50-60   Hz
Dimensions	483*480*143(mm)