Paroyal audio company, professional audio system, power amplifier Series
Power Amplifier (GX3), PRO Amplifier(GX3), audio amplifier

Features
GX3  power amplifier provide extensive protection features such as Overheat short currents, DC protection, zero current, clip limiter, soft start
Offered in 300W-1300W power area
High power toroidal transformer
Suitable to various Input / Output Connectors. Has 3 Ways Sensitivity Switches for Stereo, Bridged Mono and Parallel Mono. Also connects swiftly to speakers VIA Speakon.- Flow-through ventilation from front to back
Internal heat sinks with forced air cooling for rapid, heat dissipation
Four fan for proper cooling to maintain performance and proper working levels
Can endure 8ohm, 4ohm and 2ohm loads
Paroyal Audio Products Highly reliable and stable
Less Distortion for better quality sound
Excellent & Natural Timbre
Crossover Selector in the 2U GX3  to use with one or more subwoofer   speakers.
The GX3 Amplifier offered by us are designed and made by expert engineers using superior quality material.
Available in different power variations, these GX3 Amplifiers are high on demand across the globe

 

SPECIFICATIONS	Model: GX3
	STEREO   MODE   (Both   Channels   Driven)
8   ohms
FTC20Hz -20kHz,0.1%THD	200W
4   ohms
FTC20Hz -20kHz,0.1%THD	400W
2   ohms
EIA 1kHz, 1%THD	550 W
	BRIDGE   MONO   MODE
8   ohms
FTC20 Hz -20   kHz, 0.1%THD	800W
4   ohms
EIA 1kHz,   1%THD	1500W
Signal to Noise, 20 Hz-20kHz	100dB
	ALL   MODELS
Distortion   (Typical)
20 Hz -20kHz: 10dB below rated power	Less   than   0.03%   THD,   4   and   8   ohms
1.0kHz and below: full rated power	Less   than   0.03%   THD,   4   and   8   ohms
Frequency   Response	20   Hz-20   kHz,   ±1   dB
	-3   dB   points:   5   Hz   -   50   kHz
Damping   Factor, 1kHz and   below	Greater   than   300   at   8   ohms
Input   Impedance	10k   ohms   unbalanced,   20k   ohms   balanced
Input   Clipping	10   Vrms   (+22   dB)
Cooling	Continuously   variable-speed   fan,   rear-to-front   air   flow
Connectors,   each   channel	Input:   Active   balanced;   barrier   strip,   XLR   and   1/4"   (6.3mm)
	TRS   tip   and   XLR   (pin   2   positive)
	Output:   touch-proof   binding   posts   and   Neutrik®   Speakon®
Controls	Front:   AC   switch,   Ch.   1   and   Ch.   2   gain   knobs
	Rear:   10-position   DIP   switch
Indicators	Power-On:   Green   LED
	Signal:   Yellow   LED   (1   per   channel)
	Clip:   Red   LED   (1   per   channel)
Amplifier Protection	Stable   into   reactive   or   mismatched   loads
Load Protection	On/off   muting,   AC   coupling   ,   triac   crowbar   ,   on   each   channel)
Power Requirements	100,   120,   230   VAC,   50-60   Hz
Dimensions	2U

 

[Click to back]