首页 > 产品介绍
Power Amplifier (GX3)
基本介绍:
power amplifier (GX3) provide extensive protection features such as Overheat short currents, DC protection, zero current, clip limiter, soft start
产品描述:
SPECIFICATIONS |
Model:GX3 |
STEREO MODE (Both Channels Driven) | |
8 ohms | |
FTC20Hz -20kHz,0.1%THD | 200W |
4 ohms | |
FTC20Hz -20kHz,0.1%THD | 400W |
2 ohms | |
EIA 1kHz, 1%THD | 550 W |
BRIDGE MONO MODE | |
8 ohms | |
FTC20 Hz -20 kHz, 0.1%THD | 800W |
4 ohms | |
EIA 1kHz, 1%THD | 1500W |
Signal to Noise, 20 Hz-20kHz | 100dB |
ALL MODELS | |
Distortion (Typical) | |
20 Hz -20kHz: 10dB below rated power | Less than 0.03% THD, 4 and 8 ohms |
1.0kHz and below: full rated power | Less than 0.03% THD, 4 and 8 ohms |
Frequency Response | 20 Hz-20 kHz, ±1 dB |
-3 dB points: 5 Hz - 50 kHz | |
Damping Factor, 1kHz and below | Greater than 300 at 8 ohms |
Input Impedance | 10k ohms unbalanced, 20k ohms balanced |
Input Clipping | 10 Vrms (+22 dB) |
Cooling | Continuously variable-speed fan, rear-to-front air flow |
Connectors, each channel | Input: Active balanced; barrier strip, XLR and 1/4" (6.3mm) |
TRS tip and XLR (pin 2 positive) | |
Output: touch-proof binding posts and Neutrik® Speakon® | |
Controls | Front: AC switch, Ch. 1 and Ch. 2 gain knobs |
Rear: 10-position DIP switch | |
Indicators | Power-On: Green LED |
Signal: Yellow LED (1 per channel) | |
Clip: Red LED (1 per channel) | |
Amplifier Protection | Stable into reactive or mismatched loads |
Load Protection | On/off muting, AC coupling , triac crowbar , on each channel) |
Power Requirements | 100, 120, 230 VAC, 50-60 Hz |
Dimensions | 2U |