• pro audio Line Array System
  • Pro Speaker Systemo
  • pro audio Professional Active Speaker
  • pa audio Professional  Speaker
  • pro Guitar Amplifier
  • pro  Amplifier
  • pro Peripheral Equipment
  • pro speaker Loudspeaker
  • pro audio accessories

首页 > 产品介绍

Power Amps XP7000(MT)

基本介绍:

    Amplifier Motorola IC,XP5000,XP7000 Motorola Tansistor,XP Series power amplifier provide extensive protection features such as Overheat short currents, DC protection, zero current, clip limiter, soft start

产品描述:

    

Paroyal Audio Company Professional Audio Systems Power Amplifier XP series
Model: XP5000 Motorola IC Power Amplifier, XP7000 Motorola IC Amplifier,
SPECIFICATIONS
XP5000 (MT) Motorola   IC
XP7000(MT) Motorola   IC
 
STEREO   MODE   (Both   Channels   Driven)
8   ohms
 
 
Stereo Power
1100   W
1300   W
4   ohms
 
 
  FTC20   Hz -20   kHz,   0.1% THD
1650   W
1950   W
2   ohms
 
 
   EIA   1   kHz,   1%   THD
2600W
3200   W
 
BRIDGE   MONO   MODE
8   ohms
 
 
  FTC   20Hz-20kHz,   0.1%THD
3200W
3800   W
4   ohms
 
 
 EIA   1 kHz,   1% THD
4800   W
6000W
Signal   to   Noise,   20   Hz-20kHz
106   dB
108   dB
 
ALL   MODELS
Distortion   (Typical)
 
 20Hz -20kHz:10dB below rated   power
Less   than   0.03%   THD,   4   and   8   ohms
1.0 kHz   and   below:   full   rated   power
Less   than   0.03%   THD,   4   and   8   ohms
Frequency   Response
20   Hz-20   kHz,   ±1   dB
-3   dB   points:   5   Hz   -   50   kHz
Damping   Factor,   1   kHz and below
Greater   than   300   at   8   ohms
Input   Impedance
10k   ohms   unbalanced,   20k   ohms   balanced
Input   Clipping
10   Vrms   (+22   dB)
Cooling
Continuously   variable-speed   fan,   rear-to-front   air   flow
Connectors,   each   channel
Input:   Active   balanced;   barrier   strip,   XLR   and   1/4"   (6.3mm)
TRS   tip   and   XLR   (pin   2   positive)
Output:   touch-proof   binding   posts   and   Neutrik®   Speakon®
Controls
Front:   AC   switch,   Ch.   1   and   Ch.   2   gain   knobs
Rear:   10-position   DIP   switch
Indicators
Power-On:   Green   LED
Signal:   Yellow   LED   (1   per   channel)
Clip:   Red   LED   (1   per   channel)
Amplifier   Protection
Stable   into   reactive   or   mismatched   loads
Load   Protection
On/off   muting,   AC   coupling   ,   triac   crowbar   ,   on   each   channel)
Power   Requirements
100,   120,   230   VAC,   50-60   Hz
Dimensions
480*480*100(mm)