首页 > 产品介绍
Amplifier(Macro-Tech Series)
基本介绍:
MA Power amplifier Products
产品描述:
| SPECIFICATIONS | MA600 | MA1200 | MA2400 | MA3600VZ | MA5000VZ |
| STEREO MODE (Both Channels Driven) | |||||
| 8 ohms | |||||
| Stereo Power | 300 W | 400 W | 500 W | 1000 W | 1300 W |
| 4 ohms | |||||
| Stereo Power | 450 W | 620 W | 750 W | 1600 W | 2500 W |
| 2 ohms | |||||
| EIA 1kHz, 1% THD | 720W | 950 W | 1200 W | 2000 W | 3900W |
| BRIDGE MONO MODE | |||||
| 8 ohms | |||||
| FTC 20Hz - 20kHz, 0.1% THD | 870W | 1150 W | 1450 W | 2450 W | 4500W |
| 4 ohms | |||||
| EIA 1kHz, 1%THD | 1450 W | 1850 W | 2400 W | 3800 W | 4800W |
| Signal to Noise, 20Hz-20kHz | 98 dB | 100 dB | 101 dB | 102 dB | 106 dB |
| ALL MODELS | |||||
| Distortion (Typical) | |||||
| 20Hz-20kHz:10dB below rated power | Less than 0.03% THD, 4 and 8 ohms | ||||
| 1.0kHz and below: full rated power | Less than 0.03% THD, 4 and 8 ohms | ||||
| Frequency Response | 20 Hz-20 kHz, ±1 dB | ||||
| -3 dB points: 5 Hz - 50 kHz | |||||
| Damping Factor, 1kHz and below | Greater than 300 at 8 ohms | ||||
| Input Impedance | 10k ohms unbalanced, 20k ohms balanced | ||||
| Input Clipping | 10 Vrms (+22 dB) | ||||
| Cooling | Continuously variable-speed fan, rear-to-front air flow | ||||
| Connectors, each channel | Input: Active balanced; barrier strip, XLR and 1/4" (6.3mm) | ||||
| TRS tip and XLR (pin 2 positive) | |||||
| Output: touch-proof binding posts and Neutrik® Speakon® | |||||
| Controls | Front: AC switch, Ch. 1 and Ch. 2 gain knobs | ||||
| Rear: 10-position DIP switch | |||||
| Indicators | Power-On: Green LED | ||||
| Signal: Yellow LED (1 per channel) | |||||
| Clip: Red LED (1 per channel) | |||||
| Amplifier Protection | Stable into reactive or mismatched loads | ||||
| Load Protection | On/off muting, AC coupling , triac crowbar , on each channel) | ||||
| Power Requirements | 100, 120, 230 VAC, 50-60 Hz | ||||
| Dimensions | 483*480*143(mm) | ||||
Paroyal Audio ,Professional audio products power amplifier MA Series
Model:MA600,MA1200,MA2400,MA3600VZ,MA5000,MA5000VZ
The Paroyal Macro-Tech Series. No compromises, no gimmicks. Just brilliant engineering backed by superior manufacturing, support, and an unsurpassed commitment to quality. Like all Paroyal amps, the defining characteristic of the Macro-Tech Series is sonic accuracy. A tight, rock-solid low end, with smooth, detailed highs and a well-defined midrange. In short, the most accurate reproduction of an audio signal you’ve ever heard. And because we put the quality of sound above all else, a Paroyal is the most coveted amplifier in the business.
-
Ultra-Low Distortion:
Paroyal's patented
-
ODEP(R) Protection:
Patented Output Device Emulation Protection (ODEP) protects the amplifier and keeps the show going under adverse conditions that cause lesser amplifiers to fail. Front panel indicators show each channel's ODEP status. Several PIPTM modules also provide powerful ODEP-driven features.
-
Distortion Indicator:
Advanced Input/Output Comparator (IOC(R)) alerts you if the amplifier causes any distortion of 0.05% or more.
-
PIP compatibility:
Accommodates Programmable Input Processor (PIP) accessories that are used to customize the amplifier for specific applications. MA 02-Series amps are PIP2 compatible.
-
Selectable Mono Modes:
Bridge-Mono mode provides double output voltage and Parallel-Mono mode provides double output current from a single channel.
-
Selectable Sensitivities
: Choose from three input sensitivities: 0.775 volts or 1.4 volts for full rated power into 8 ohms, or a voltage gain of 26 dB.
-
Detented Level Controls:
Detented level controls make it easy to set and reset precise levels.
-
VZ Power Supply Technology:
The Macro-Tech 3600VZ and 5000VZ use patented power-supply technology which provides enormous power density and an optimum power match with a wide range of loads.
-
Current Indicator:
(Macro-Tech 5000VZ only) Cutting edge current flow/current limit (ILOAD/ILIMIT) indicators tell you if current is flowing to the loads, and if the loads demand more current than the amplifier can deliver.
-
On-Board Compressors:
(Macro-Tech 5000VZ only) Each channel has a custom compressor that reduces peak signal levels during input overload and output clipping. The compressors can be set for fast or slow operation, or turned off for output clipping.